Gyro Avant for BeoVision Avant 55. Maximum Rotation of 76 degrees to the Left and Right, from our advanced manual wall bracket. This elegant model is manufactured from solid natural finish, anodised aluminium offering the highest quality solution for your most demanding installations.

When compressed, the screen is 182mm from the wall, extending to 720mm when fully extended.

Bracket movement allows rotation from the double arm mechanism, turning the TV by up to 76 degrees to the left and the right. There is no tilt adjustment. This bracket is ideal for corner mounting, or where rotation to left and right is required or if the edge of the screen needs to be pulled away from the wall. The extended movement also allows the television to be concealed within the wall and then pulled out for viewing.

A cable management feature for Gyro Avant is the removable 50mm diameter cable cover. The centre of the cover is 55mm up from the lower edge of the wall plate. Removal of the cover creates a 50mm diameter opening, which will allow TV signal cables to pass through bracket into the cable management tube. See photographs.

Accessories & Decoders behind BeoVision Avant Blu-ray players are mounted to the rear of Avant using our range of Blu-ray brackets for vertical players from Toshiba or Panasonic. You can also mount other devices, games consoles, decoders etc to the wall behind the TV using STB System 9. Follow this link to the wall mount solutions.

Dimensions on the pdf datasheet indicate the space available between the wall and the rear of the TV cabinet. The Bracket can be pulled forward if more space is required.

GYRO Avant 55 – conversion for Old Gyro

It is possible to upgrade an existing GYRO installation for Avant 55. This will allow you to replace an older TV with a new BeoVision Avant 55. Your GYRO must be the current type which was purchased from STB after 28/10/2010. The bracket will look the same as the images on this page. The TV fixing plate has four screws at 50x20mm.

Older GYRO brackets with thinner arms has a TV fixing plate at 50x50mm plate cannot support the weight of Avant 55. Please look at the images.